© Copyright Drakefield Limited 2007-2008. Turn Ignition OFFĪctive faults still exist, repeat Steps 1 through V NOTE: Last fault stored is first fault displayedĬlear Faults from memory: Press and hold blink code switch for at least three seconds, then releaseĪll stored faults successfully cleared. Repeat Steps I, II, and III until System O.K. Second Digit: 1 - 6 flashes, Pause (4 seconds)įind definition for blink code on Blink Code List Faults will be displayed one time onlyĬount the flashes to determine the blink codeįirst Digit: 1 - 8 flashes, Pause (1.5 seconds) Stored Fault: Lamp will display code for each stored fault then stop blinking. Press and hold Blink Code Switch for one second, then releaseĪBS indicator lamp begins flashing two-digit blink code(s)Īctive Fault: Lamp will repeatedly display one code Make necessary repairs -Ĭontinue with blink code diagnostics (Go to Step II below)ĭrive vehicle lamp will go out when vehicle reaches 4 mph (6 km/h) No recognizable active faults in the ABS. Faults cleared from ECU, but - vehicle not driven 4.

Please ensure all necessary Health and Safety precautions are implemented before commencing any repair workĪBS indicator lamp comes on momentarily then goes out, indicating System O.K.ĪBS indicator lamp does not light, indicating possible wiring fault or burned-out bulb.

If you are unsure how to read ABS Blink Codes from the ECU, start by familiarising yourself with the diagrams below, and where appropriate, follow the step by step procedure in the tables.

If you already know how to read ABS Blink Codes from the ECU in question, please go straight to STEP 4: Blink code list.

STEP 3: Blink code identification and system response ABS Troubleshooting for Trucks, Trailers, and Buses

Bendix abs flashing